Where the intake valve located on gm 3800 series engine?
Santonio
2009-01-01 14:19:18 UTC
Where is the intake valves on gm 3800 series engine??
Four answers:
Nigel M
2009-01-01 14:23:09 UTC
in the heads, three in each head.
?
2016-05-23 09:10:37 UTC
As for GM's keep in mind on the 3800 motor, what motor would not smoke or burn up up if the valve covers leaked like a sieve below braking down on the exhaust manifolds. My 99 Grand Prix was topic to the recall. All they did was re-locate the ignition wires on the entrance financial institution of cylinders. I'd be completely ashamed to consider a car to a seller with awful leaking valve covers. In 46 years I've by no means experienced a messy valve include leak. The origional 231 cubic inch Buick motor came out in the early 60's. Manufacturing rights had been sold to Chrysler for a brief time period of time prior to GM bought it back. I'm certain Robert owns a 3800 motor simply because it sounds as if he is experienced experiance tuning 1 up. Maybe Denso plugs nevertheless certainly not foolish multi floor trick Bosch plugs which use to go in Stihl chainsaws, Skidoos and VW's. DexCool combined with motor oil has neen traced to the EGR valve pipe inside the crappy plastic intake manifild on this particular engine. If DexCool is at fault why are not each other GM motors effected? If the valve teach is prehistoric why have GM motors experienced roller hydraulic lifters sinse 1988? Has Ford gotten on the band wagon yet. The sequence 2, 3800 90 degree V-6 is an fascinating motor. Three ignition coils with two posts each hearth two cylinders at the identical instant, 1 on the entrance financial institution and 1 on the rear. This is accomplished simply because of the flat crankshaft firing impulses and redesigned roller lifter camshaft lobes. The purpose for all these changes is to decrease V-6 - 90 degree bore motor vibration. They tossed in a balance shaft to further knock down vibration. The big gerotor oil pump is distinctive as it is driven straight off the pulley end of the crankshaft inside of the entrance cover. The very best component has been the dependability and gasoline economy. 32 MPG on the freeway driving the speed-limit in the Summer is not fifty percent bad.
another man with a plan......
2009-01-01 14:23:06 UTC
they are in the cylinder heads like all engines. The 3800 V6 has 12 valves one intake and one exhaust per cylinder.
?
2009-01-01 18:47:39 UTC
All valves in GM motors are located within the cylinder head.
ⓘ
This content was originally posted on Y! Answers, a Q&A website that shut down in 2021.